Answers are grounded in this paper and cite their sources.
High-resolution neutron imaging is difficult, due to the low-light output of neutron scintillators, and the spread of light within common neutron-sensitive scintillators as well as the spread of intermediate particles occurring during the detection process. To address this issue, we have developed a highresolution scintillator for neutron imaging by combining enriched10B with the well-known CsI:Tl scintillator films. CsI:Tl has excellent properties for X-ray imaging applications, due to a high light yield of 60 000 photons/MeV, and high spatial resolution, which derives from its microcolumnar structure, which channels scintillation light to the photodetector. To enable CsI:Tl to detect neutrons,10B (96% enriched) was deposited by electron beam directly onto the CsI:Tl film, making a layered scintillator structure in which the alphas produced by the neutron interaction with10B are detected in the CsI:Tl. The10B layer was approximately 3 μm thick, while the thickness of the CsI:Tl film was 11 μm. These novel layered scintillators were integrated into the high-resolution neutron imaging detector [“Paul Scherer Institute (PSI) Neutron Microscope”] at the Pulse OverLap DIffractometer (POLDI) beamline at the PSI. With our10B/CsI:Tl scintillator, we were able to achieve a spatial resolution down to 9 μm. To demonstrate the effectiveness of the layered scintillator, we present results obtained by thermal neutron imaging as well as high-resolution neutron-computed tomography. Finally, we believe there is considerable scope for future optimization of the performance of this system.
No takes yet. Share an insight, caveat, or question.
Miller et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: