Answers are grounded in this paper and cite their sources.
This paper presents a description and a set of experimental results on Ionic Polymer‐Metal Composites (IPMC's) as dynamic sensors, transducers, and actuators. Strips of IPMC can exhibit large dynamic deformation if placed in a time‐varying electric field of the order of 10's of volts/mm. Conversely, dynamic deformation and flexing of such ionic polymers produces dynamic electric fields that closely follow the form of the electric signal. The underlying principle of such a mechanoelectric effect in IPMC's can be explained by the linear irreversible thermodynamics in which ion and solvent transport are the fluxes and electric field and solvent pressure gradient are the forces. Important parameters include the material conductance and the solvent permeability. The dynamic sensing, transduction, and actuation responses of a strip of IPMC under an impact‐type loading is also discussed. When a cantilever strip of IPMC is flipped, a damped oscillatory electric response is produced across a pair of electrodes placed at the cantilever of the strip, which is highly repeatable with a broad frequency range above 10 4 Hz. Such direct mechanoelectric responses of IMPC's are related to the endo‐ionic mobility due to stresses imposed. Imposition of a finite solvent flux without allowing a current flux causes the material to create a certain conjugate electric field that can be dynamically monitored and measured. IPMC's are shown to be highly capacitive at low frequencies while they are highly resistive under high frequency excitations. IN a sending mode, IPMC strips can also sense chemical environments and humidity. These types of sensors/transducers/actuators conceivably can replace piezoresistive and piezoelectric sensors with just one sensor for broad ranges of frequencies.
No takes yet. Share an insight, caveat, or question.
Shahinpoor et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: