Answers are grounded in this paper and cite their sources.
A large diameter and uniform microwave plasma (about 30 cm in diameter) over 10 cm from the source has been produced by scaling up a preliminarily proposed device with an annular slot antenna and satisfying the ECR (electron cyclotron resonance) condition in a chamber with neodymium ring-shaped permanent magnets. The spatial structure of the plasma density in both non-reactive Ar and reactive SF 6 gases was obtained by a Langmuir probe. The tentative etching of silicon (Si) was performed in the SF 6 microwave plasma. The spatial profile of the etch rate in the radial direction was found to be similar to that of electron density in the SF 6 plasma. The uniformity of etch rate was within 2.5% at the position where electron density profile reached the best uniformity ( approximately=5%). The etching profile of the poly-Si pattern in the microwave plasma using pure SF 6 gas was also observed by a scanning electron microscope (SEM).
No takes yet. Share an insight, caveat, or question.
Ikushima et al. (1995) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: