Answers are grounded in this paper and cite their sources.
A simple lab‐scale weaving method was used to produce multidirectional fiber preforms to improve the delamination resistance and damage tolerance of composites. Mechanical properties measured in this study included short‐beam shear strength and damage tolerance of 2‐D and 3‐D woven composites. The constituents of fiber and matrix in these composites are Kevlar‐29 (Du Pont) and Epon 828 (Shell Chemical Co.) epoxy. Attention was directed to the differentiation of deformation and failure mechanisms in these composites as a function of material parameters and loading conditions. The sequence of failure mechanisms differ between 2‐D and 3‐D composites. Results indicated that 3‐D woven composites exhibited higher shear strength than 2‐D woven composites. Also, 3‐D composites absorbed more impact energy than 2‐D composites. Failure mechanisms of composites subjected to repeated impacts were observed intermittently by using scanning electron microscopy and light microscopy. The failure of 2‐D composites was due to a combination of shear and tensile mode, but in 3‐D composites the failure was dominated by tensile mode.
No takes yet. Share an insight, caveat, or question.
Chen et al. (1995) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: